FMC Technology by Negribossi

​

​در این تکنولوژی نحوه جدیدی از سبک سازی قطعه توسط میکس کردن گاز ازت درپلیمر و در هنگام بارگذاری و چرخش ماردون ارائه میگردد. و قابل استفاده در کلیه ماشین آلات تزریق پلاستیک نگری باسی میباشد.این فن آوری که نسبت به مشابه آن در بازار که توسط یک کمپانی امریکایی تامین میشود،بسیار کم هزینه تر، ساده تر و با نتیجه بهتر است و اخیرا توسط کمپانی نگریباسی ثبتاختراع شده است.

In addition, this technology can be used to produce all types of thermoplastic parts (plastics

thermoplastics) as well as liquid silicon (LSR) & nbsp;

Technology

FMC The company does not have an infusion limitation, for this purpose, gas from the end of the extruder is injected during the molding process, causing The creation of porosity (pho-mineralization) becomes] within the piece and the structural style to a maximum of 30% of the weight of the piece.

The benefits of this technology FMC can be listed below:

- & nbsp;

Styling and Consuming Less Raw Materials

- & nbsp;

Reduced viscosity of substances in the infusion phase

- & nbsp;

Need less clamping force

-

Increase production speed (shorten the injection cycle)

- & nbsp;

Can be used in a variety of thermoplastic plastics as well as liquid silicon

-

This technology is usable in all of the company’s plastic injection machines ( all models) and does not need to design specific machines.

This technology is very useful in industries where the production of lightweight parts is

(such as automotive, building industry, etc.).